Laboratory Range - Accessories

Cold Mould Seal / Separating

Packing: 110 ml
Product Code: 6401/110

Packing: 5 Liter
Product Code: 6401/005

Properties & Advantages:

  • Cold Mould Seal is a specially developed formulation of separating solution
    for universal use, suitable for both packing / pressing technique & cast moulding.
  • Makes tough film with elasticity which is unbreakable in pressure.
  • Film does not chip off from plaster at pressure. High quality of the raw material guarantees optimum separation with both techniques.

Shelf life and storage:

  • Best before 24 months under proper storage.

Die Hardener

Color: Transparent

Packing: 100ml glass bottle

Product Code: 8103 / 100

Properties & Advantages:

  • It produces a homogenous coating on the die stone and plaster attributed to its viscosity.
  • It seals, hardens and water proofs stone and plaster.
  • It protects models against abrasion specifically at marginal area which is most prone to breakage.
  • The film does not disassociate from the die while building wax pattern due to heating.
  • It is rapid setting and thereby reduces working time.

Shelf life and storage:

  • Best before 24 months under proper storage.

Die Spacer

Color: Silver / Golden.

Packing: 100ml glass bottle with 10ml applicator bottle+50ml Thinner

Product Code: (Golden 8101/100) (Silver 8102/100)

Properties & Advantages:

  • It produces a homogenous coating of 5 in single application on the die for crown and bridge restoration thereby assuring accurate seating of restorations.
  • The film does not disassociate from the die while building wax pattern due to heating.
  • It is rapid setting and thereby reduces working time.

Shelf life and storage:

  • Best before 24 months under proper storage.

Die Separator / Die Lubricant

It is the final product that would be applied to a die prior to the formation of the wax pattern. It is an ideal release agent for wax, porcelain, and composite materials.

Packing: 100ml

Packaging code: 3003 / 100

Shelf life and storage:

  • Best before 24 months under proper storage.

Shellac Base Plates

Thickness: Upper / Lower Base Plate: 1.3mm, 1.7mm. 2.0mm, 2.5mm and 3.0mm
(+/- 0.15mm) (Custom Thickness Catered)

Colour: Brown / Pink / Aluminium

Packing:
Brown Base Plate (8 Upper + 4 Lower)
Yellow base Plate (8 Upper + 4 Lower)

Packaging code:
1001/084
1024/084
Type: It comes in different formulations for different climatic conditions (LMP / HMP / Al. Filled)

Properties & Advantage:

  • They are ready to use Maxillary & Mandibular plates – 8 Upper & 4 Lower.
  • Optimum heat resistance to minimize overheating of the Plate.
  • Easily adaptable on heating and easy to work with.
  • Retain the shape stability and do not wrap back on cooling.
  • Optimum mechanical strength to resist breaking during Try-in denture
  • Does not adhere to plaster

Shelf life and storage:

  • Best before 24 months.
  • Store below 30°C under proper storage and avoid from direct sunlight.