Laboratory Range - Alloys

R2 Alloy (Ni-Cr Ceramic Alloy for PFM Bonding)

For fabricating custom Trays, mouth guards and vaccum formed splints. For denture repairs. For studycasts. For lab procedures such as articulator cast mounting. For processing full or partial acrylic dentures.

Packing: (Yellow) 30kg polyester gunny / paper bag.

Product Code: 4001/030

Packing: (Green): 30kg polyester gunny / paper bag.

Product Code: 4002/030

Packing: (Off White) 30kg polyester gunny / paper bag.

Product Code: 4005/030

Lab Range
Type: III – Specification:

  • Water/Powder: 30ml/100gm
  • Mixing Time: 60 seconds wet
  • Working Time: 6 minutes dry
  • Setting Time: 8 to 12 minutes
  • Hard Set (Initial): 30 Minutes
  • Wet Compressive Strength: 250 kg/cm2
  • Dry Compressive Strength: 500 kg/cm2
  • Setting Expansion (Max): 0.08%

Shelf life and storage:

  • Best before 24 months when stored in cool and dry place.

Ni – Cr Alloy / White Metal for Cast Restorations & Crown & Bridge (Non Precious Alloy)

For crown and bridge, dies and cast partials. For basing dental arches and opposing models. For making study models.
In use where economical yet tough, non brittle and durable models are required.

Packing: (White) 30kg polyester gunny / paper bag.

Product Code: 4102 / 030

Type: IV – Specification

  • Water/ Powder: 24-26ml/100gm
  • Mixing Time: 45 seconds wet
  • Working Time: 5 minutes dry
  • Setting Time: 8-12 minutes
  • Hard Set (Initial): 30 Minutes
  • Wet Compressive Strength: 400 kg/cm2
  • Dry Compressive Strength: 800 kg/cm2
  • Linear Expansion (Max): 0.08%

Shelf life and storage:

  • Best before 24 months when stored in cool and dry place.